Multiflex

Glossy air drying ink intended for printing on flexible (tarpaulins), rigid and adhesive PVC, polymethyl methacrylate and polycarbonate. Glossy air drying ink intended for printing on flexible (tarpaulins), rigid and adhesive PVC, polymethyl methacrylate and polycarbonate.
Gives glossy printing with excellent blocking resistance.

The Multiflex inks, are particularly suitable for printing on rigid and flexible PVC (self-adhesive, plates, tubes, sheets, PVC coated cloth).
They also display excellent adherence on polycar-bonate and polymethyl methacrylate.
Not suitable on polystyrene and ABS.

Can be used on all printing materials (manual, semi-automatic, automatic, roller to roller).

Specifications

• Appearance: glossy
• Average density: 1.10
• Viscosity: 8 ± 2 Pa.s
• Drying:
  – Ambient air: 15 min. at 20°C
  – Air jet dryer: 30 s at 50°C
• Covering power by opacity: good
• Coverage rate: 50 to 60 m²/l with a 120 34 mesh
• Special resistance: white gas
• Weather resistance: good
• Light fastness: good
• Diluents and cleaning solvents:
  Diluents:
  – Thinner: 4905
  – Retarder: 9640
  – Adherence on flexible PVC: 9640
  – Gun: XC876
  – Brush: 4903
  Solvents:
  – Manual: 2881, 2891, NS-81, NS-91 and NS-100
  – Washer: 2881, 2899, NS-81, NS-99 and NS-100
• Expiry: refer to the label
• Special property: thermoformable

Pantone^® colour matching

All the Multiflex inks, marked with an asterisk *, can be colour matched according to the Pantone^® colour guide through the online Colour Matching System developped by Tiflex.