A low-odour, physically drying ink for direct or transfer printing of fabrics.
Polyworks Fire Protection is mainly used on thick synthetic fabrics, coated fabrics and leathers (handbags and luggage, covers and cases, awnings). It is also used on cotton and polyester cotton (workwear), as well as on most technical fabrics.
It is characterized by its fire resistance according to the NF EN ISO 15025 tests (test associated with the ISO 14116 standard).
- Appearance: glossy
- Viscosity: 38 ± 5 Pa.s
- Drying: air = 30 mins at 20°C / forced air tunnel 2 min at 60°C
- Coverage power by opacity: good
- Washing resistance: very good
- Fire resistance: ISO 15025 test OK
- Expiry date: refer to the labelling
- reducer 4908
- retarder 4968
- manual: 2891, NS-81, NS-91& NS-99
- washer: 2891, 2899, NS-81, NS-91 & NS-99
|Ref. 1 kg|
|Cherry red OP||34A2008|
|Medium blue OP||34A2022|
|Medium green OP||34A2033|
|Ref. 1 kg|
|Adhesive powder PET||3863327|
The recommendations for use provided are based on our current knowledge, are given for instructive purposes and are entirely objective. However, as your conditions of use are out of our control, this information would not imply any guarantee on our part. They do not exempt you from carrying out prior tests in order to determine the compatibility of our inks with your printing media within your application conditions. Our responsibility, if it were to be employed, would be limited to the market value of the products that we delivered to you and that you use.