Flash cure is an intermediate dryer preheater for textile inks.
Equipped with short waves infrared transmitters, it is composed of a heating element and a base.
The start of each cycle is controlled by a contact rod which detects the board under the machine head.
For the treatment of fragile meshes, Flash cure is equipped with a half-power programming and with a cooling during the heating time.
It is manufactured in compliance with the NFC 20-30 directive.
Flash cure can be adapted on automatic MHM carrousels. In that configuration, it is supplied with 2 sliding bars.
2 models are available:
- 40 x 40 cm
- 40 x 60 cm
- Drying time adjustment
- Cooling time adjustment
- Equiped with wheels and a brake