The PLASTIC FLUO inks are especially suitable for printing on rigid or flexible PVC (plates, tubes, sheets, PVC coated cloth).The PLASTIC FLUO inks are especially suitable for printing on rigid or flexible PVC (plates, tubes, sheets, PVC coated cloth).
In addition, they offer excellent adherence on polycarbonate, polymethyl methacrylate, ABS and polystyrene.
They must be printed on white or on very light backgrounds.
On flexible PVC, check that the «antiblocking» qualities of this ink are sufficient.
- Average density: 1,05
- Viscosity: 7 ± 1 Pa.s
- Covering power by opacity: few
- Coverage rate: 35 m²/l with a 100 – 40 mesh
- Weather resistance: few
- Light fastness: few
- Diluents and cleaning solvents:
– Thinner: 4909
– Retarder: 4900
– Brush: 4909
– Manual: 2881, 2891, 2899, NS-81, NS-91, NS-99 and NS-100
– Washer: 2881, NS-81, NS-91, NS-99 and NS-100
- Expiry: refer to the label
|Ref. 1 litre|
The recommendations for use provided are based on our current knowledge, are given for instructive purposes and are entirely objective. However, as your conditions of use are out of our control, this information would not imply any guarantee on our part. They do not exempt you from carrying out prior tests in order to determine the compatibility of our inks with your printing media within your application conditions. Our responsibility, if it were to be employed, would be limited to the market value of the products that we delivered to you and that you use.