silk screen

UViprim MS

UV drying ink designed for PVC self-adhesive printing, rigid PVC, polystyrene, treated polyester and polycarbonate. NVP FREE.

The UVprim MS ink is used at a standard viscosity or slightly diluted with mesh in the screen mesh 150 to 180 fibres/cm.


Covering white is used alone as a white ink, whereas the thinner white can be mixed with other colours in a proportion of 10% to 20% to obtain the correct opacity.
Fusion temperature speeds depend on the thickness deposited, the colour and the type of substrate, the type and the number of lamps.
The colours polymerize between 10 and 20 m/min under a 120 W/cm lamp. The tints containing white, like grey cross-link more slowly.
Faced with the variety of plastic substrates, a trial is crucial before going into production.


  • Appearance: glossy
  • Viscosity: 5 ± 1 Pa.s
  • Coverage rate: 100 m²/l with a 150 – 34 mesh
  • Light fastness: (scale from 1 to 8) good
  • Diluents and cleaning solvents:
    – Diluents: 31970NG or 3194058
    – Solvents: 2881, 2891, NS-81 and NS-91
  • Expiry: refer to the label

Pantone® colour matching

All the UViprim MS inks, marked with an asterisk *, can be colour matched according to the Pantone® colour guide through the online Colour Matching System developped by Tiflex.


Standard colours
Ref. 5 kg
Thinner base * 3794000
Covering white 3794087
Lemon * 3794002
Gold yellow * 3794004
Orange * 3794006
Scarlet * 3794007
Cherry red * 3794008
Cyclamen * 3794014
Purple/Violet * 3794016
Process blue * 3794027
Reflex blue * 3794025
Emerald green * 3794033
Black * 3794044
4-Colours process
Ref. 5 kg
4-colours yellow 3794050
4-colours magenta 3794052
4-colours cyan 3794054
4-colours black 3794056
Ref. 5 kg
Mat varnish 3794059
Gloss varnish * 3794058
Photoinitiator, 100 g 38C0595
Catalyst, 1 l 3822090

The recommendations for use provided are based on our current knowledge, are given for instructive purposes and are entirely objective. However, as your conditions of use are out of our control, this information would not imply any guarantee on our part. They do not exempt you from carrying out prior tests in order to determine the compatibility of our inks with your printing media within your application conditions. Our responsibility, if it were to be employed, would be limited to the market value of the products that we delivered to you and that you use.

Also available from our range