silk screen

Akilor

Glossy air drying ink intended for printing E-flute polypropylene (Akylux®), treated  by Corona® effect (since the duration of this treatment is limited, carry out preliminary tests).

Akilor inks are printed on pre-treated polypropylene sheets, used for outdoor short and medium duration signs: construction site panels, display racks, etc.

Specifications

  • Appearance: from satin finish to shiny finish
  • Smell: few
  • Average density: 1.10
  • Viscosity: 8 ± 3 Pa.s
  • Drying:
    – Air: 15 min. at 20°C with a 120 – 34 mesh
    – Pulsed air: tunnel 30 s at 50/55°C with a 120 – 34 mesh
  • Covering power by opacity: good to very good for black and white
  • Coverage rate: 50 m²/kg with a 120 – 34 mesh
  • Weather resistance: good except for fluo colours
  • Special resistance: oil, grease
  • Diluents and cleaning solvents:
    Diluents:
    – Thinner: 4909 or 2899 (antistatic effect)
    – Retarder: 4900 or propygel
    Solvents:
    – Manual: 2881 2891, 2899, NS-81, NS-91, NS-99 and NS-100
    – Washer: 2899, NS-81, NS-91, NS-99 and NS-100
  • Expiry: refer to the label

Pantone® colour matching

All the Akilor inks, marked with an asterisk *, can be colour matched according to the Pantone® colour guide through the online Colour Matching System developped by Tiflex.

Standard colours OP
Ref. 1 kg
White OP * 3882000
Lemon OP * 3882002
Gold yellow OP * 3882004
Orange OP * 3882006
Cherry red OP * 3882008
Carmine red OP * 3882013
Cyclamen OP * 3882014
Purple/Violet OP * 3882016
Medium blue OP * 3882022
Deep blue OP * 3882026
Royal blue OP * 3882024
Medium green OP * 3882032
Deep green OP * 3882034
Brown OP * 3882042
Black OP * 3882044
4-Colours process thixo
Ref. 1 kg
Thixo 4-colours yellow 3882050
 Thixo 4-colours magenta 3882052
Thixo 4-colours cyan 3882054
Thixo 4-colours black 3882056
Thixo 4-colours base 3882057
Fluo
Ref. 1 kg
Fluo lemon 3882070
Fluo red 3882071
Fluo green 3882072
Bases
Ref. 1 kg
Overprint varnish and thinner base * 3882058
Matting base 3882065

The recommendations for use provided are based on our current knowledge, are given for instructive purposes and are entirely objective. However, as your conditions of use are out of our control, this information would not imply any guarantee on our part. They do not exempt you from carrying out prior tests in order to determine the compatibility of our inks with your printing media within your application conditions. Our responsibility, if it were to be employed, would be limited to the market value of the products that we delivered to you and that you use.


Also available from our range