silk screen

Epoxy EV

Epoxy EV, 2-component ink offering excellent adherence on glass and metal and exceptional resistance to chemical agents.

Not suitable for outdoor use.

All colours are formulated with no silicone additive to allow silvering.



  • Appearance: glossy
  • Average density: 1.20 for the OP colours and thixo four-colour process
  • Viscosity: 8 ± 1 Pa.s
  • Drying:
    – Air: 45 min. at 20°C
    – Air jet dryer: 5 min. at 80°C (can be handled)
  • Curing: 30 min. at 160°C (complete polymerization)
  • Covering power by opacity: good
  • Coverage rate: 45 m²/kg with a 100 -40 mesh
  • Special resistance after polymerization: bases and solvents
  • Diluents and cleaning solvents:
    – Thinner: 2899
    – Retarder: 4906, 4921 and NS-99
  • – Manual and washer: 2899 and NS-99
  • Expiry date: refer to the label


Pantone® colour matching

All the Epoxy EV inks, marked with an asterisk *, can be colour matched according to the Pantone® colour guide through the online Colour Matching System developped by Tiflex.


Standard colour
Ref. 1 kg
Covering white3322000
Gamme OP
Ref. 1 kg
White OP *3322005
Lemon OP *3322002
Gold yellow OP *3322015
Orange OP *3322020
Cherry red OP *3322008
Carmine red OP *3322033
Cyclamen OP *3322030
Purple/Violet OP *3322035
Medium blue OP *3322040
Deep blue OP *3322045
Royal blue OP *3322050
Medium green OP *3322032
Deep green OP *3322034
Brown OP *3322060
Black OP *3322065
4-Colours process thixo
Ref. 1 kg
Thixo 4-colours yellow3322080
Thixo 4-colours magenta3322082
Thixo 4-colours cyan3322084
Thixo 4-colours black3322086
Thixo 4-colours base3322088
Ref. 1 kg
Thinner base and overprint varnish *3322079
Matting base3322078
Ref. 1 kg
Tension agent (silicone)3262050
Adherence agent, 25 g3320289
Catalyst 2606, 100 g dose3320594
Catalyst 2606, 1 kg boxe3322094
Catalyst XG800, 200 g dose3321097
Catalyst XG800, 1 kg boxe3322097
Catalyst 6969, 100 g dose3320796
Catalyst 6969, 1 kg boxe3322096

The recommendations for use provided are based on our current knowledge, are given for instructive purposes and are entirely objective. However, as your conditions of use are out of our control, this information would not imply any guarantee on our part. They do not exempt you from carrying out prior tests in order to determine the compatibility of our inks with your printing media within your application conditions. Our responsibility, if it were to be employed, would be limited to the market value of the products that we delivered to you and that you use.

Also available from our range